Jai Balaji Engineering Works

Double Toggle Jaw Crusher

Crushing is managed by pulping of material by jaw plates dully placed at due for maximum output and minimum

consumption of power and exerting appropriate thrust in the crushing zone. The basic thrust is obtained by the eccentric

movement of pitman which is transferred to lever with the help of rear and front toggle plates connect the pitman with

lever and toggle block. The Liver Consist of one jaw plate fe. moving and other jaw plate i.e fixed on the body. The thrust

crushes the material between the jaw plates. Then Crusher material travels downward by gravity and falls in the discharge chutes. The Sizes of Products can be adjusted by cutting or increasing the toggle plates and lowering the wedge block.

SALIENT FEATURE OF SINGLE TOGGLE JAW CRUSHER

1.Mainly the features of Single Toggle Jaw Crusher are same as Double Toggle Jaw Crusher, But the difference in single toggle is crushing and stroking is done by pitman only.

2.Crushing Capacity as compare to double toggle is 10 to 20 % more, but life of jaw plates is less as compare to double toggle jaw crusher.

The size of required output material can be taken in closed side settings as compare to double toggle jaw crusher

3.The power consumption in single toggle is less than double toggle jaw crusher

4.Quality of output material is more cubical, but the percentage of stone dust increases than double toggle jaw crusher.

JAI BALAJI manufacture high quality flexible and efficient portable Mobile Crushing & Screening Unite the requirement of the customers. Our Mobile crushing plants is equipped with Jaw Crusher, Screen, and Moveable chassis and diesel engine or electric motor. This Mobile crusher is available:: reduction capacity

25 TPH. These crushers are best suitable for small road project or construction hilly and remote areas. We are

also manufacture mobile crusher for GSB, WMM material riSd for road project and mobile screening unit for

river bed material up to 100 TPH.

Additional Information:

• Delivery Time: 2 MONTHS

JAI BALAJI manufacture high quality flexible and efficient portable Portable Crushing & Screening Unite the requirement of the customers. Our Mobile crushing plants is equipped with Jaw Crusher, Screen, and Moveable chassis and diesel engine or electric motor. This Mobile crusher is available:: reduction capacity

25 TPH. These crushers are best suitable for small road project or construction hilly and remote areas. We are

also manufacture mobile crusher for GSB, WMM material riSd for road project and mobile screening unit for

river bed material up to 100 TPH.

Salient Feature of Mobile Crusher & Screening Unit

Jaw Crusher

Jaw crusher can be used either single toggle or double toggle. It well equipped with antifriction and fabricate

all-welded steel construction duly stress relieved, which not only gives added ernout eliminates any risk c casting failures.

Additional Information:

• Delivery Time: 2 MONTHS

SALIENT FEATURE OF ROLLER CRUSHER

1.Precisely fabricated from prime plate. Stiffeners are provided of required no. & size to improve its rigidity Weld with Mig welding technology. Body is covered from three sides & feed chute is provided to feed material evenly throughout the width of roll crusher Roller cell of MS steel casting of 12 to 14% MN steel as per IS 276 Gr. 3, corrugated or plan both type of roller

are available as per requirement of material to be crushed

2.Fly wheel of static balance of cast steel material along with Trapper bush to be provided to easy out trouble free dismantling & Assemble.

3.Shaft of precisely design of special steel, Rigid in construction and fitted with self aligned spherical roller bearing of high capacity, are provided for long life.

4.Spring of specially designed to give cushioning to the adjustable roller are provided of special spring steel material.

5.Cast iron or steel casting bearing hosing, Machined very accurately are provided.

6.To hold the roller cell tight on its position. A taper flange coupling of fabricated & machined accurately provided. The coupling bolts hold the cell on its position rigidly

Only Periodic grease (Castrol Ap 3) lubrication is required at all Bearings.

JAI BALAJI manufacture Roller Crusher in different sizes and model according to requirement of customers. These roller

crushers can be either used for making stone dust (Sand) by feeding minus 25 mm input material or for making minus 20

mm output material by feeding minus 40 mm input material. Now a day it is widely used in northern India and its demand

increases in southern state of india. It is because of govt. have banned on quarrying of sand from the river and sea.

JAI BALAJI manufacture high quality flexible and efficient portable Mobile Crushing & Screening Unite the

requirement of the customers. Our Mobile crushing plants is equipped with Jaw Crusher, Screen, and

Moveable chassis and diesel engine or electric motor. This Mobile crusher is available:: reduction capacity

25 TPH. These crushers are best suitable for small road project or construction hilly and remote areas. We are

also manufacture mobile crusher for GSB, WMM material riSd for road project and mobile screening unit for

river bed material up to 100 TPH.

Additional Information:

• Delivery Time: 30 Days

JAI BALAJI manufacture Roller Crusher in different sizes and model according to requirement of customers

These roller crushers can be either used for making stone dust Sand by feeding minus 25 mm input material or for

making minus 20 mm output material by feeding minus 40 mm input material. Now a day it is wildly used in northern

India and its demand increases in southern state of India. It is because of govt. has started ban on quarrying of sand from

the river and sea shore. This machine is very efficient in making stone dust (Sand) as compared to VSL VS machines

for making the output material in cubical shape. No doubt the percentage of stone dust in VSi machine is increased, but it

is not a completely Sand making machine.

Double Toggle Jaw Crusher

Crushing is managed by pulping of material by jaw plates dully placed at due for maximum output and minimum

consumption of power and exerting appropriate thrust in the crushing zone. The basic thrust is obtained by the eccentric

movement of pitman which is transferred to lever with the help of rear and front toggle plates connect the pitman with

lever and toggle block. The Liver Consist of one jaw plate fe. moving and other jaw plate i.e fixed on the body. The thrust

crushes the material between the jaw plates. Then Crusher material travels downward by gravity and falls in the discharge

chutes. The Sizes of Products can be adjusted by cutting or increasing the toggle plates and lowering the wedge block.